Skip to content
Boater seated in a white captain’s boat seat at the helm of a pontoon boat cruising across a lake.

Cruise in Comfort with a Versatile Flip-Up Bolster Helm Chair

Enjoy cushioned support in the full-seat position,

then raise the bolster for a higher perch and extra standing room at the helm.

marinexplore

Stay Comfortable in Every Helm Position

Cruise between stops or relax at anchor in a two-tone marine helm chair with contoured support, padded seating and a flip-up front bolster.

  • Move from Full Seat to Raised Perch

Keep the bolster down for complete thigh support, or lift it when you want a higher view and more room to stand at the controls.

  • Support That Follows Your Shape

The sculpted backrest and shaped side sections support your back and hips, helping you settle more comfortably into the seat.

  • Cushion the Longer Hours

Resilient padding softens the main contact areas, giving this boat helm chair a supportive feel during longer cruises.

A Two-Tone Captain Chair Made for Sun, Splashes and Easy Care

Help the Colors Stay Fresh

Help the Colors Stay Fresh

UV-resistant vinyl helps protect the contrasting two-tone finish from sun-related fading, keeping the selected colorway looking fresh.

Spend Less Time Cleaning

Spend Less Time Cleaning

Small spills and splashes wipe away from this easy-care marine seat with a soft, damp cloth, leaving you less cleanup after cruising.

A Clean Finish from Every Angle

A Clean Finish from Every Angle

Textured panels, smooth piping and even stitching give this captain’s chair a neat, carefully finished look in either color combination.

marinexplore

Open-Profile Captain Boat Seating with Space to Move

The open sides and lower-back cutout make it easier to enter, turn and reposition, while the contoured backrest keeps support where you need it.

  • Reach the Controls More Easily

The open-sided profile leaves room for your elbows and upper body as you steer, operate nearby controls or look around the boat.

  • Change Your Height at the Helm

Raise the front bolster for a higher perch and more standing room, then lower it when you want the complete seating surface.

Check the Fit and Install Your Captain Boat Seat 

marinexplore
 5″ × 5″ Hole Spacing 

Step 1 - Align the Mounting Holes

 

✓ Check the Seat Direction
Position your marine helm chair to face the intended direction before starting the screws.

✓ Align the Mounting Holes
Align the seat’s 5″ × 5″ mounting holes with a compatible pedestal or mounting plate.

✓ Start All Four Screws by Hand
Start all four mounting screws loosely by hand. Leave them loose until every screw is started.

 

✓ Check the Seat Direction
Position your marine helm chair to face the intended direction before starting the screws.

✓ Align the Mounting Holes
Align the seat’s 5″ × 5″ mounting holes with a compatible pedestal or mounting plate.

✓ Start All Fasteners by Hand
Start all four mounting screws loosely by hand. Leave them loose until every screw is started.

Two-Tone Boat Captain Chair FAQs

Quick answers about fit, included parts, installation and care.

Will This Flip-Up Bolster Helm Chair Fit My Existing Pedestal or Swivel?

Yes, if your existing pedestal or swivel is secure, in good condition and compatible with this captain seat’s 5" × 5" mounting-hole spacing and required fasteners.

Check for four matching holes or slots spaced 5 inches (127 mm) center to center, both side to side and front to back. Also confirm that the installed seat height and surrounding clearance suit your driving position.

For help checking compatibility, email photos and measurements of your mounting plate to support@marinexplorestore.com before ordering.

What Should I Measure Before Ordering This Captain Boat Seat?

Before ordering this two-tone marine helm chair, check:

  • Available space: Compare the seat’s overall width at its widest point and its total depth with the available space at your helm.
  • Installed seat height: Measure from the deck to the top of the seat cushion, including your pedestal and any swivel or slide.
  • Operating clearance: Allow room around controls, storage lids and walkways, including movement from a swivel or slide.
  • Bolster clearance: Make sure there is enough space to raise the front bolster and stand comfortably at the helm.

For help checking the fit, email photos and measurements of your setup to support@marinexplorestore.com before ordering.

How Do I Clean This Two-Tone Captain’s Chair?

Clean the vinyl surfaces with a soft cloth, mild soap and water. Wipe away sunscreen, food spills and dirt promptly, then wipe with a clean, damp cloth and dry.

Avoid harsh solvents, bleach, abrasive pads and stiff brushes. Test any new cleaner on a small, hidden area first. If unsure, contact support@marinexplorestore.com before using it.

Are the Pedestal and Mounting Hardware Included?

The pedestal is not included. The package includes one boat captain chair with flip-up bolster and four mounting screws.

A swivel and slide are also not included.

Can I Install This Flip-Up Bolster Boat Seat Myself?

You may be able to install this marine captain seat yourself if you are comfortable using basic hand tools and your existing mount is secure, compatible and in good condition.

Follow the installation steps provided with the seat. If drilling or reinforcement is required, consult an experienced marine technician before proceeding.

For help checking compatibility, email photos of your existing mount to support@marinexplorestore.com.

Does This Marine Helm Chair Swivel or Adjust in Height?

Swiveling and height adjustment depend on the pedestal or mounting system you use. This boat helm chair does not include a pedestal, swivel or slide.

Check that your existing hardware is compatible before ordering.

How Does the Flip-Up Bolster Work?

Lower the bolster when you want the full seat. Flip it up for a raised perch, a clearer view ahead and more room to stand at the helm.

 Check the Fit Before You Order 

Three quick checks to help you decide whether this flip-up bolster captain chair fits your boat and driving position.

Check the Seat Dimensions
1.

Check the Seat Dimensions

Compare the chair’s width, depth and height with your available helm space. Include the pedestal, swivel or slide when checking the final installed height.

Check Your Existing Mount
2.

Check Your Existing Mount

Confirm that your pedestal or swivel matches the 5" × 5" mounting-hole spacing and is secure, compatible and in good condition.

Allow Room to Sit, Stand and Steer
3.

Allow Room to Sit, Stand and Steer

Leave clearance for the seat, flip-up bolster and any swivel or slide movement, with enough room to reach the controls and stand comfortably at the helm.