Skip to content
Boater seated in a white captain’s boat seat at the helm of a pontoon boat cruising across a lake.

Cruise in Comfort with a Bucket-Style Boat Captain Seat

Settle into the cushioned, contoured seat for supportive comfort,

then raise the flip-up bolster for a higher perch and more room to stand at the helm.

marinexplore

Comfort That Adapts to Your Position at the Helm

Cruise between stops or relax at anchor in a padded boat helm seat that combines contoured support, flexible seating and a flip-up bolster.

  • Switch Between Seated and Raised Positions

Lower the bolster for a full captain’s seat, or flip it up for a higher perch and more space to stand while docking or cruising.

  • Settle Into Shaped Back Support

The contoured backrest and side sections follow your body, giving your back and hips a more supported place to rest.

  • Cushion the Longer Hours

Padded contact areas give this marine captain seat a softer feel while you remain at the controls or relax between stops.

A Marine Captain Seat Made for Sun, Splashes and Easy Care

Help Keep the Two-Tone Finish Fresh

Help Keep the Two-Tone Finish Fresh

UV-resistant vinyl helps protect the white and gray boat seat from sun-related fading, helping its clean, modern finish stay fresh.

Wipe Away Everyday Messes

Wipe Away Everyday Messes

Small spills, splashes and surface marks wipe off the easy-care upholstery with a soft, damp cloth, leaving you less cleanup after cruising.

Clean Details from Every Angle

Clean Details from Every Angle

Textured gray panels, crisp white accents and even stitching give this captain’s chair a neat, carefully finished appearance.

marinexplore

Open-Profile Boat Helm Seating with Room to Move

The open sides and lower-back cutout leave space to enter, turn and reposition, while the contoured backrest supports you at the helm.

  • Move Easily Around the Controls

The open-sided profile gives your elbows and upper body room to move as you steer, reach nearby controls or look around the boat.

  • Raise Your Seating Position When Needed

Flip up the front bolster for a higher perch and additional standing room, then lower it when you want the support of the full seat.

Check the Fit and Install Your Boat Captain Seat

Images show a different color of the same model. Installation is identical.

marinexplore
 5″ × 5″ Hole Spacing 

Step 1 - Align the Mounting Holes

 

✓ Check the Seat Direction
Position your marine helm chair to face the intended direction before starting the screws.

✓ Align the Mounting Holes
Align the seat’s 5″ × 5″ mounting holes with a compatible pedestal or mounting plate.

✓ Start All Four Screws by Hand
Start all four mounting screws loosely by hand. Leave them loose until every screw is started.

 

✓ Check the Seat Direction
Position your marine helm chair to face the intended direction before starting the screws.

✓ Align the Mounting Holes
Align the seat’s 5″ × 5″ mounting holes with a compatible pedestal or mounting plate.

✓ Start All Fasteners by Hand
Start all four mounting screws loosely by hand. Leave them loose until every screw is started.

Bucket-Style Boat Captain Seat FAQs

Quick answers about fit, included parts, installation and care.

Will This Captain’s Seat Fit My Existing Pedestal or Swivel?

Yes, if your existing pedestal or swivel is secure, in good condition and compatible with this captain’s seat’s 5" × 5" mounting-hole spacing and required fasteners.

Check for four matching holes or slots spaced 5 inches (127 mm) center to center, both side to side and front to back. Also confirm that the installed seat height and surrounding clearance suit your driving position.

For help checking compatibility, email photos and measurements of your mounting plate to support@marinexplorestore.com before ordering.

What Should I Measure Before Ordering This Boat Helm Seat?

Before ordering this marine captain chair, check:

  • Available space: Compare the seat’s overall width at its widest point and its total depth with the available space at your helm.
  • Installed seat height: Measure from the deck to the top of the seat cushion, including your pedestal and any swivel or slide.
  • Operating clearance: Allow room around controls, storage lids and walkways, including movement from a swivel or slide.
  • Bolster clearance: Make sure there is enough space to flip up the front bolster and stand comfortably at the helm.

For help checking the fit, email photos and measurements of your setup to support@marinexplorestore.com before ordering.

How Do I Clean This Bucket-Style Captain’s Chair?

Clean the vinyl surfaces with a soft cloth, mild soap and water. Remove sunscreen, food spills and dirt promptly, then wipe with a clean, damp cloth and allow the upholstery to dry.

Avoid harsh solvents, bleach, abrasive pads and stiff brushes. Test any new cleaner on a small, hidden area first. If unsure, contact support@marinexplorestore.com before using it.

Are the Pedestal and Mounting Hardware Included?

The pedestal is not included. The package includes one marine helm chair and four mounting screws.

A swivel and slide are also not included.

Can I Install This Marine Captain Seat Myself?

You may be able to install this captain boat seat yourself if you are comfortable using basic hand tools and your existing mount is secure, compatible and in good condition.

Follow the installation steps provided with the seat. If drilling or reinforcement is required, consult an experienced marine technician before proceeding.

For help checking compatibility, email photos of your existing mount to support@marinexplorestore.com.

Does This Boat Helm Chair Swivel or Adjust in Height?

Swiveling and height adjustment depend on the pedestal or mounting system you use. This seat does not include a pedestal, swivel or slide.

Check that your existing hardware is compatible and provides the movement or adjustment you need before ordering.

How Does the Flip-Up Bolster Work?

Lower the bolster when you want the full seat. Flip it up for a raised perch, a clearer view ahead and more room to stand at the helm.

 Check the Fit Before You Order 

Three quick checks to help you decide whether this white and gray marine helm chair fits your boat.

Check the Seat Dimensions
1.

Check the Seat Dimensions

Compare the chair’s width, depth and height with your available helm space. Include the pedestal, swivel or slide when checking the final installed height.

Check Your Existing Mount
2.

Check Your Existing Mount

Confirm that your pedestal or swivel matches the 5" × 5" mounting-hole spacing and is secure, compatible and in good condition.

Allow Room to Sit, Stand and Steer
3.

Allow Room to Sit, Stand and Steer

Leave clearance for the seat, flip-up bolster and any swivel or slide movement, with enough room to reach the controls and stand comfortably at the helm.